ECUs and displays

eVision² 7.0

Highly robust display with a 7.0-inch touchscreen

Request a Quote
ECU_Display_Visual

About eVision² 7.0

The highly robust eVision² 7.0 comes with an 800×480 pixel 7-inch display and 10 freely programmable keys. You can read in engine and control data, or connect a joystick through two independent CAN channels, and visualize everything in the smartest possible way. These ARM-based terminals are programmed in CODESYS® 3 like the larger eVision² 10.4, and provide the same impressive graphics library.

You can use transparent dials, tilt images, embed an analog camera signal or move freely in PDF© documents, e.g., a user manual. These fast-booting operator terminals offer much more than most other products on the market today – including a flat, easy-to-clean IP 65 front and a separate USB connection. 

Key Benefits

Easy-to-clean IP 65 front, optionally bonded

Picture-in-picture function

Display and generation of PDF documents

USB connection for display and subsequently connected ECU flashing

Ability to attach 2 cameras with simultaneous video feeds

2 CAN and 1 Ethernet interfaces

Easy interface implementation in C or CODESYS®3

Product Overview


Product CPU Number I/Os Field Bus / Interfaces Safety Certifcation / SIL Level Programming Support
TTC 2310 3 cores 32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
36 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 2380 3 cores 32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
40 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
2 x Ethernet
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 2385 3 cores32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
40 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
2 x BroadR-Reach*
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 2390 6 cores 32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
40 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
2 x BroadR-Reach*
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 590 32-bit,
180 MHz
36 inputs (analog, digital, timer)
60 outputs (36 x PWM with current feedback)
6 x CAN
1 x CAN ISOBUS
1 x BroadR-Reach®
1 x LIN
1 x RS-232
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 580 32-bit,
180 MHz
36 inputs (analog, digital, timer)
60 outputs (36 x PWM with current feedback)
7 x CAN
1 x Ethernet
1 x LIN
1 x RS-232
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 540 32-bit,
180 MHz
52 inputs (analog, digital, timer)
44 outputs (28 x PWM with current feedback)
4 x CAN EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 510 32-bit,
180 MHz
44 inputs (analog, digital, timer)
40 outputs (16 x PWM with current feedback)
3 x CAN
1 x LIN
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 508 32-bit,
180 MHz
44 inputs (analog, digital, timer)
32 outputs (10 x PWM with current measurement)
2 x CAN
1 x CAN ISOBUS
1 x BroadR-Reach®
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
C-programming (Matlab Simulink I/O Blocklib available)
TTC 94 16/32 bit,
80 MHz
28 inputs (analog & digital)
20 outputs (8 x PWM, 4 PWM with current feedback)
4 x CAN
1 x LIN
1 x RS 232
EN ISO 13849 PL d* CODESYS®
C-programming (Matlab Simulink I/O Blocklib available)
TTC 32S 16-bit,
80 MHz
14 inputs (analog & timer)
16 outputs (digital, voltage, PVG and 8x PWM,
6 with current feedback)
2 x CAN EN ISO 13849 PL d* C-programming (Matlab Simulink I/O Blocklib available)
TTC 30SH 16-bit,
80 MHz
14 inputs (analog & timer),
16 outputs (digital, voltage, PVG and 8x PWM, 6 with current feedback)
1 x CAN EN ISO 13849 PL c C-programming (Matlab Simulink I/O Blocklib available)
N4 – Network Controller Up to 11970
DMIPS on 4x
Arm Cortex-
A53 and 3x
Arm Cortex-M7
2 Outputs
1 Wake-up Input
1x1000BASE-T1,
6x100BASE-T1,
1x100BASE-TX,
12xCAN (FD), 2xLIN
ISO 26262 ASIL B Yocto GNU/Linux and other POSIX OS possible AUTOSAR
Classic envirionment
*available for
C-programming only

Product CPU Number I/Os Field Bus / Interfaces Safety Certifcation / SIL Level Programming Support
TTC 48XS 16/32 bit,
80 MHz
28 inputs (analog & digital),
20 outputs (8x PWM)
1 x CAN EN ISO 13849 PL d Slave software preinstalled –
attached to a master
controller via CANopen as slave unit
TTC 30XSH 16/32 bit,
80 MHz
14 inputs (analog & timer),
16 outputs (digital, voltage, PVG and 8 x PWM, 6 with current feedback)
1 x CAN EN ISO 13849 PL c Slave software preinstalled –
attached to a master
controller via CANopen

Safety as slave unit

This product is supplied by TTControl and distributed for the automotive market by TTTech Auto. For software updates and other technical information, visit the service area. If you need access, please get in touch with your TTTech Auto sales contact.

Service Area 

For further information, including price and availability, please contact products@tttech-auto.com.

Visit the ECU & Displays Service Area