ECUs and displays

Vision 3

The new generation of robust operator interfaces

Request a Quote
ECU_Display_Visual

About Vision 3

Modern HMIs need increasing numbers of cameras and sensors as well as higher bandwidth, high performance and appealing visualization possibilities. The HMI interface Vision 3 is designed to be the center of complex system architecture, offering an extensive set of interfaces and suiting a multitude of control and visualization use cases.

Intuitive user interaction and high-performance electronics allow handling complex tasks, while enabling maximum flexibility and efficiency.

The 12.1 inch LCD display is available with a single core processor (Vision 312) or with a 4-Core-CPU and an enhanced set of interfaces (Vision 312Plus). All displays are optically bonded for perfect sunlight readability, they can withstand dust and water ingress as well as extreme temperatures, shocks and vibrations.

Key Benefits

High computational and graphical multimedia processing power

Advanced passive cooling concept to preserve full CPU performance in demanding environments

Excellent sunlight readability due to optical bonding and high brightness panels

Simultaneous display of up to four camera streams

Picture-in-picture functionality, PDF display, picture animations

CAN, ISOBUS and Automotive BroadR-Reach® interfaces

Integrated loudspeaker

Fast boot-up time and sleep mode

Linux platform for C/C++ (e.g. Qt) or CODESYS® programming

Slim and flexible design

Built for harsh environments (IP65 front and back)

Starter Kit contains:

  • Vision 312Plus display
  • RJ45 crossover adapter
  • Ethernet cable
  • USB cable
  • Ethernet-USB cable
  • Cable harness
  • USB-USB cable
  • USB stick with software and documentation

Product Overview


Product CPU Number I/Os Field Bus / Interfaces Safety Certifcation / SIL Level Programming Support
TTC 2310 3 cores 32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
36 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 2380 3 cores 32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
40 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
2 x Ethernet
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 2385 3 cores32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
40 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
2 x BroadR-Reach*
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 2390 6 cores 32-bit,
300 MHz
20 inputs (analog, digital, timer, SENT)
40 outputs
4 x CAN
1 x CAN ISOBUS
1 x CAN (wake-up capable)
2 x BroadR-Reach*
1 x LIN
IEC 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d
SRL2
ISO 26262 ASIL C
ISO 19014 MPL d
C programming (Matlab Simulink I/O Blocklib available)

CODESYS® Safety SIL 2 including support for CANopen Safety Master
TTC 590 32-bit,
180 MHz
36 inputs (analog, digital, timer)
60 outputs (36 x PWM with current feedback)
6 x CAN
1 x CAN ISOBUS
1 x BroadR-Reach®
1 x LIN
1 x RS-232
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 580 32-bit,
180 MHz
36 inputs (analog, digital, timer)
60 outputs (36 x PWM with current feedback)
7 x CAN
1 x Ethernet
1 x LIN
1 x RS-232
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 540 32-bit,
180 MHz
52 inputs (analog, digital, timer)
44 outputs (28 x PWM with current feedback)
4 x CAN EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 510 32-bit,
180 MHz
44 inputs (analog, digital, timer)
40 outputs (16 x PWM with current feedback)
3 x CAN
1 x LIN
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
CODESYS® Safety SIL 2
C programming (Matlab Simulink I/O Blocklib available)
SAFERTOS® integration
TTC 508 32-bit,
180 MHz
44 inputs (analog, digital, timer)
32 outputs (10 x PWM with current measurement)
2 x CAN
1 x CAN ISOBUS
1 x BroadR-Reach®
EN 61508 SIL 2
EN ISO 13849 PL d
ISO 25119 AgPL d*
ISO 26262 ASIL C*
C-programming (Matlab Simulink I/O Blocklib available)
TTC 94 16/32 bit,
80 MHz
28 inputs (analog & digital)
20 outputs (8 x PWM, 4 PWM with current feedback)
4 x CAN
1 x LIN
1 x RS 232
EN ISO 13849 PL d* CODESYS®
C-programming (Matlab Simulink I/O Blocklib available)
TTC 32S 16-bit,
80 MHz
14 inputs (analog & timer)
16 outputs (digital, voltage, PVG and 8x PWM,
6 with current feedback)
2 x CAN EN ISO 13849 PL d* C-programming (Matlab Simulink I/O Blocklib available)
TTC 30SH 16-bit,
80 MHz
14 inputs (analog & timer),
16 outputs (digital, voltage, PVG and 8x PWM, 6 with current feedback)
1 x CAN EN ISO 13849 PL c C-programming (Matlab Simulink I/O Blocklib available)
N4 – Network Controller Up to 11970
DMIPS on 4x
Arm Cortex-
A53 and 3x
Arm Cortex-M7
2 Outputs
1 Wake-up Input
1x1000BASE-T1,
6x100BASE-T1,
1x100BASE-TX,
12xCAN (FD), 2xLIN
ISO 26262 ASIL B Yocto GNU/Linux and other POSIX OS possible AUTOSAR
Classic envirionment
*available for
C-programming only

Product CPU Number I/Os Field Bus / Interfaces Safety Certifcation / SIL Level Programming Support
TTC 48XS 16/32 bit,
80 MHz
28 inputs (analog & digital),
20 outputs (8x PWM)
1 x CAN EN ISO 13849 PL d Slave software preinstalled –
attached to a master
controller via CANopen as slave unit
TTC 30XSH 16/32 bit,
80 MHz
14 inputs (analog & timer),
16 outputs (digital, voltage, PVG and 8 x PWM, 6 with current feedback)
1 x CAN EN ISO 13849 PL c Slave software preinstalled –
attached to a master
controller via CANopen

Safety as slave unit

This product is supplied by TTControl and distributed for the automotive market by TTTech Auto. For software updates and other technical information, visit the service area. If you need access, please get in touch with your TTTech Auto sales contact.

Service Area 

For further information, including price and availability, please contact products@tttech-auto.com

Visit the ECU & Displays Service Area